BECKHOFF 倍福ks1362 端子模块ks1362 原装现货模块

BECKHOFF  倍福ks1362 端子模块ks1362 原装现货模块
KS1362
KL1382
KS1382
KL1402
KS1402
KL1404
KS1404
KL1408
KS1408
KL1412
KS1412
KL1414
KS1414
KL1418
KS1418
KL1434
KS1434
KL1488
KS1488
KL1498
KS1498
KL1501
KS1501
KL1512
KS1512
KL1702
KS1702
KL1712
KS1712
KL1712-0060
KL1722
KS1722
KL1804
KL1808

数字量输入端子模块 KL1362 借助电流回路分析来自断线传感器的输入信号，能可靠地监视有固定电阻比值的报警触点。在过程映像中，一个位指示传感器的状态，另一个位报告短路或断线情况。红色或绿色 LED 指示两个输入位的状态。
The digital KL1362 input terminal analyses the input **s of break-in sensors with the aid of a current loop. Alarm contacts with a fixed resistance ratio can be monitored safely. In the process image, the state of the sensor is indicated by one bit each. A further bit reports short-circuits or line interruptions. Red or green LEDs indicate the state of the two input bits.
Technical data	KL1362 | KS1362
Connection technology	2-wire
Specification	break-in alarm
Number of inputs	2
Nominal voltage	24 V (-15 %/+20 %)
“0” ** current	≤ 1 mA
“1” ** current	≥ 1 mA
Operating voltage	5.1 V
Line interruption	 3 mA
Cable resistance	≤ 200 Ω BECKHOFF  倍福ks1362 端子模块ks1362 原装现货模块
Input filter	3.0 ms
Current consumption K-bus	typ. 35 mA
Electrical isolation	500 V (K-bus/field potential)
Bit width in the process image	4 inputs
Configuration	no address or configuration setting
Special features	monitoring of alarm contacts
Weight	approx. 55 g
Operating/storage temperature	0…+55 °C/-25…+85 °C
Relative humidity	95 %, no condensation
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 20/variable
Pluggable wiring	for all KSxxxx Bus Terminals BECKHOFF  倍福ks1362 端子模块ks1362 原装现货模块
Approvals	CE, UL, Ex, GL
标准 PC 机/工业 PC 硬件，*额外硬件 Windows NT/2000/XP/Vista、嵌入式 NT/XP、CE Beckhoff 实时内核 EtherCAT、Lightbus、PROFIBUS DP/MC、 CANopen、DeviceNet、 SECOS、以太网和 PC 硬件 4 个多任务 PLC，每个 PLC Run-Time 系统包含 4 个 任 务，开发环境和 Run-Time 系统可以在同一台 PC 或不同的 PC 上（CE 环境下只有 Run-Time 系统） 过程映像大小、标志区、程序大小、POU 大 小、变量数量仅取决于用户存储器的大小 （对于NT/ 2000 / XP/Vista，较大 2GB） 大于 50 ?s ，可调 1 ?s （Pentium? 4，2.8 GHz），用于 1000 条 PLC 指令 IEC 61131-3：IL、FBD、 LD、 SFC、ST、 强大的功能库管理和方便的调试